Description
A lightweight and durable multi-caliber suppressor with patented and proven OSS Flow-Through® technology, the HX-QD 762 Ti is built with a combination of Grade 5 Titanium and heat treated 17-4 stainless steel. It delivers superior accuracy and repeatability, hearing safe 136-139 dB performance, is full-auto rated on 5.56, and cross-platform compatible on 5.56 up to .300 WM– the one to have when every ounce counts.
Compatible with Muzzle Brake-QD 556/762, Flash Hider-QD 556/762, and Comp-QD 762.
Materials & Finish: Unlike traditional suppressors that manage trapped gas, intense heat and pressure with blast baffles, OSS Flow-Through® technology redirects expanding gases forward allowing us to use 17-4 stainless steel deflectors and internal Grade 5 Titanium coils. The result is a remarkably cooler and extremely durable suppressor. The HX-QD 762 has a fully-welded outer body made of Grade 5 Titanium coated with C-series high temperature black Cerakote®.
Sound Pressure Levels: The HX-QD 762 Ti is a light-weight optimal choice for the widest range of rifles of different calibers. Sound pressure levels are measured at the shooters ear to comply with current military specifications.
- 134 – 138 dB on 20” Remington 700 Rifle using commercial grade 150 gr ammo
- 133 – 137 dB on 16” AR15 DI using commercial grade 55 gr ammo
- 138 – 140 dB on 16” 7.62 AR15 DI using commercial grade 150 gr ammo
- PERFORMANCE: RELIABILITY: SAFETY: ADDITIONAL NOTES: •The HX-QD 762 Ti provides modular and integrated signature management capabilities that reduce detection by sight, sound, and electro-optical/infrared (EO/IR) sensor systems. •An adjustable wrench or OSS QD tool may be needed to remove the suppressor when component temperature exceeds 160 degrees Fahrenheit (71.1 Celsius). •The attachment or removal of the sound suppressor does not degrade system precision (ammunition & rifle dependent). •Removing and reattaching the suppressor, the center of impact shall shift no more than 1.0 MOA at 100 meters (109 yards). •Removing the suppressor, the center of impact shift shall be repeatable and predictable within 1 MOA at 100 meters (109 yards). •The suppressor, when attached to the rifle, shall shift the mean point of impact of rounds fired, relative to firing without the suppressor, by no more than 2.0 MOA at a range of 100 meters (109 yards). •When attached, the suppressor will not adversely affect shot dispersion. •The suppressor does not require any fired rounds to seat or lock before grouping. •10,000 round accuracy certification provided by Barrett. After firing 10,000 rounds of M118LR on a Barrett Rec 10, suppressor will be within ½ MOA of original accuracy test, provided, host weapon is still capable. Using the firing schedule in Table 2. •The HX-QD 762 Ti will withstand 10 cycles of the firing schedule in Table I. •Bolt Velocity increases +/- 5% from unsuppressed to suppressed. •The suppressor does not require the use of an adjustable gas block or other weapon modifications. •The suppressor is capable of withstanding impact when dropped from a minimum height of 1.5 meters without causing any structural or functional damage. •The suppressor will withstand vibration and rough-handling requirements as defined by MILSTD-810G, Method 514.6, and cannot come loose during transportation due to vibration or incidental contact. •The suppressor can be removed by hand after stress test firing schedule from Table 1. •The suppressor does not require any proprietary lubrication. •The suppressor will not increase toxic fume exposure to the operator. •The suppressor will pass sub-safe off gas testing per SS800-AG-MAN-010/P-9290 Rev. A section F.4.2. •The HX-QD 762 Ti will not present a cook-off hazard after firing M118LR 7.62 ammunition for 100 rounds of continuous automatic fire. •The suppressor coatings provide protection from degradation in all climatic environments and weather conditions experienced in all climates and geographical areas including maritime, coastal, desert, tropical jungle, arctic, urban areas, and mountain environments. •The suppressor is capable of being submerged in salt water to a depth of 66 feet for a minimum of 2 hours and returned to the surface, and function without degradation in capability or performance. •The suppressor may be fitted with a Mirage Mitigation Device (MMD) that inhibits heat mirage from impacting target identification, recognition or precision when using a magnified direct view optic and clip-on night sight. •Frangible ammunition may be used with the suppressor. •A QD Bullet Trap, Blank Firing Adapter (QD-BTBFA) is available. The QD-BTBFA functions reliably using M82 Blanks and can safely catch one (1) M80A1 rounds. •The suppressor will be fully functional when removed from a fully submerged position, with a drain time equal or less than 3 seconds.
